|
HX(*)830PVC |
||
| Injection Unit |
|
|
| Screw diameter قطر ماردون |
mm |
100 |
| Screw L/D ratio نسبت D/L ماردون |
L/D |
20.9 |
| Injection capacity in theory حجم تزریق |
cm³ |
4264 |
| Injection weight(PVC) وزن تزریق بر مبناي پلی استایرن |
g |
5117 |
| Injection pressure فشار تزریق |
MPa |
158 |
| Injection rate نرخ تزریق |
g/s |
825 |
| Plasticizing capacity |
g/s |
108 |
| Screw speed سرعت ماردون |
rpm |
110 |
| Clamping Unit واحد گیره |
|
|
| Clamping force نیروي گیره |
KN |
8300 |
| Moving mould-plate stroke کورس بازشو گیره |
mm |
1080 |
| Max.Mould height بیشترین ارتفاع قالب |
mm |
1050 |
| Min.Mould height کمترین ارتفاع قالب |
mm |
400 |
| Space between tie-bars فاصله بین تایبارها |
mm |
1070×970 |
| Hydraulic ejector force نیروي پران |
KN |
200 |
| Hydraulic ejector stroke کورس پران |
mm |
300 |
| Ejector number تعداد میل پران |
n |
13 |
| Other سایر |
|
|
| Pump pressure حداکثر فشار پمپ |
MPa |
16 |
| Motor/Driving power توان موتور پمپ |
KW |
37×2 |
| Heating capacity توان المنت ها |
KW |
48.8 |
| Machine dimension ابعاد دستگاه |
m |
11.3×3.25×3.4 |
| Machine weight وزن دستگاه |
t |
42.3 |
| Oil tank capacity ظرفیت مخزن روغن |
L |
1315 |
HXM830-PVC: PVC injection molding machine
HIGHSUN PVC fitting machine, clamping force:218-1100T
1.Adopt the special design of screw & barrel for PVC material, install the air fan for cooling barrel to avoid the material overheating and coking;
2. Increased bigger grade oil motor to facilitate PVC raw material plasticizing and molding;
3.Extended width of security door for making PVC fitting mould with better installation, to suit PVC fitting molds (core puller cylinder) installation convenience;
4.Supply with special technical solution for PVC injection, not only modify the screw & barrel like others, but also the special solution with complete hydraulic system and injection unit.
توضیحات
