| HX(*)218PVC | ||
| Injection Unit واحد تزریق |
||
| Screw diameter قطر ماردون | mm | 50 |
| Screw L/D ratio نسبت D/L ماردون | L/D | 20 |
| Injection capacity in theory حجم تزریق | cm³ | 431 |
| Injection weight(PVC) وزن تزریق بر مبناي پلی استایرن |
g | 517 |
| Injection pressure فشار تزریق | MPa | 170 |
| Injection rate نرخ تزریق | g/s | 190 |
| Plasticizing capacity | g/s | 30 |
| Screw speed سرعت ماردون | rpm | 170 |
| Clamping Unit واحد گیره |
||
| Clamping force نیروي گیره | KN | 2180 |
| Moving mould-plate stroke کورس بازشو گیره | mm | 520 |
| Max.Mould height بیشترین ارتفاع قالب | mm | 580 |
| Min.Mould height کمترین ارتفاع قالب | mm | 200 |
| Space between tie-bars فاصله بین تایبارها | mm | 520×520 |
| Hydraulic ejector force نیروي پران | KN | 80 |
| Hydraulic ejector stroke کورس پران | mm | 150 |
| Ejector number تعداد میل پران | n | 9 |
| Other سایر |
||
| Pump pressure حداکثر فشار پمپ | MPa | 16 |
| Motor/Driving power توان موتور پمپ | KW | 23 |
| Heating capacity توان المنت ها | KW | 13.55 |
| Machine dimension ابعاد دستگاه | m | 5.74×1.76×2.12 |
| Machine weight وزن دستگاه | t | 6.8 |
| Oil tank capacity ظرفیت مخزن روغن | L | 281 |
HXM218-PVC: PVC injection molding machine
HIGHSUN PVC fitting machine, clamping force:218-1100T
1.Adopt the special design of screw & barrel for PVC material, install the air fan for cooling barrel to avoid the material overheating and coking;
2. Increased bigger grade oil motor to facilitate PVC raw material plasticizing and molding;
3.Extended width of security door for making PVC fitting mould with better installation, to suit PVC fitting molds (core puller cylinder) installation convenience;
4.Supply with special technical solution for PVC injection, not only modify the screw & barrel like others, but also the special solution with complete hydraulic system and injection unit.
توضیحات
