|
HX(*)298PVC |
||
| Injection Unit واحد تزریق |
||
| Screw diameter قطر ماردون |
mm |
60 |
| Screw L/D ratio نسبت D/L ماردون |
L/D |
20.6 |
| Injection capacity in theory حجم تزریق |
cm³ |
820 |
| Injection weight(PVC) وزن تزریق بر مبناي پلی استایرن |
g |
984 |
| Injection pressure فشار تزریق |
MPa |
168 |
| Injection rate نرخ تزریق |
g/s |
324 |
| Plasticizing capacity |
g/s |
52 |
| Screw speed سرعت ماردون |
rpm |
180 |
| Clamping Unit واحد گیره |
||
| Clamping force نیروي گیره |
KN |
2980 |
| Moving mould-plate stroke کورس بازشو گیره |
mm |
600 |
| Max.Mould height بیشترین ارتفاع قالب |
mm |
690 |
| Min.Mould height کمترین ارتفاع قالب |
mm |
230 |
| Space between tie-bars فاصله بین تایبارها |
mm |
605×590 |
| Hydraulic ejector force نیروي پران |
KN |
80 |
| Hydraulic ejector stroke کورس پران |
mm |
150 |
| Ejector number تعداد میل پران |
n |
13 |
| Other سایر |
||
| Pump pressure حداکثر فشار پمپ |
MPa |
16 |
| Motor/Driving power توان موتور پمپ |
KW |
30 |
| Heating capacity توان المنت ها |
KW |
18.15 |
| Machine dimension ابعاد دستگاه |
m |
6.50×2.15×2.08 |
| Machine weight وزن دستگاه |
t |
8.6 |
| Oil tank capacity ظرفیت مخزن روغن |
L |
415 |
HXM298-PVC: PVC injection molding machine
HIGHSUN PVC fitting machine, clamping force:218-1100T
1.Adopt the special design of screw & barrel for PVC material, install the air fan for cooling barrel to avoid the material overheating and coking;
2. Increased bigger grade oil motor to facilitate PVC raw material plasticizing and molding;
3.Extended width of security door for making PVC fitting mould with better installation, to suit PVC fitting molds (core puller cylinder) installation convenience;
4.Supply with special technical solution for PVC injection, not only modify the screw & barrel like others, but also the special solution with complete hydraulic system and injection unit.
توضیحات
