|
HX(*)470PVC |
||
| Injection Unit واحد تزریق |
||
| Screw diameter قطر ماردون |
mm |
75 |
| Screw L/D ratio نسبت D/L ماردون |
L/D |
20 |
| Injection capacity in theory حجم تزریق |
cm³ |
1634 |
| Injection weight(PVC) وزن تزریق بر مبناي پلی استایرن |
g |
1961 |
| Injection pressure فشار تزریق |
MPa |
173 |
| Injection rate نرخ تزریق |
g/s |
474 |
| Plasticizing capacity |
g/s |
78 |
| Screw speed سرعت ماردون |
rpm |
160 |
| Clamping Unit واحد گیره |
||
| Clamping force نیروي گیره |
KN |
4700 |
| Moving mould-plate stroke کورس بازشو گیره |
mm |
780 |
| Max.Mould height بیشترین ارتفاع قالب |
mm |
820 |
| Min.Mould height کمترین ارتفاع قالب |
mm |
300 |
| Space between tie-bars فاصله بین تایبارها |
mm |
820×770 |
| Hydraulic ejector force نیروي پران |
KN |
120 |
| Hydraulic ejector stroke کورس پران |
mm |
200 |
| Ejector number تعداد میل پران |
n |
13 |
| Other سایر | ||
| Pump pressure حداکثر فشار پمپ |
MPa |
16 |
| Motor/Driving power توان موتور پمپ |
KW |
30+23 |
| Heating capacity توان المنت ها |
KW |
23.15 |
| Machine dimension ابعاد دستگاه |
m |
7.85×2.5×2.4 |
| Machine weight وزن دستگاه |
t |
16.4 |
| Oil tank capacity ظرفیت مخزن روغن |
L |
687 |
HXM470-PVC: PVC injection molding machine
HIGHSUN PVC fitting machine, clamping force:218-1100T
1.Adopt the special design of screw & barrel for PVC material, install the air fan for cooling barrel to avoid the material overheating and coking;
2. Increased bigger grade oil motor to facilitate PVC raw material plasticizing and molding;
3.Extended width of security door for making PVC fitting mould with better installation, to suit PVC fitting molds (core puller cylinder) installation convenience;
4.Supply with special technical solution for PVC injection, not only modify the screw & barrel like others, but also the special solution with complete hydraulic system and injection unit.
توضیحات
